Відео

Thank you SO MUCH for posting this! It’s impossible to tell from the app what portion of the machine they’re referring to, and it’s also unclear whether you’re looking at a small part or large. You saved me a lot of time and frustration.

Also I opened mine as instructed but it was clean . But the ramp where the vacuum goes up has a hole where it connects , take that apart and look in the hole . I had a dog cookie stuck

This helped me 🎉

Without you i would have never guessed wth do they want from me. 😂 Thanks!

Very helpful. Thank you!

Omg ive had troublw with this for months. Who knew i had to turn it upsdie down

I now assume every robot vacuum needs this kind of maintenance weekly.

Thank you so much! I was completely confused as well.

used this in my video. thank you for this piece of history

So Mine didn't get this message, but I noticed that the bag wasn't filling up for months I thought I'd have to take it apart entirely. Anyway this is the same on the S7 Max V ultra too. Here's hoping that my bag will actually fill up properly now!

So many thanks to you Jeff. You just solved my long struggle with this matter.

THANK YOU 🎉

Cylinder 3 and 4 exploded somehow. Crack in the block present no valve gasket failure or head gasket failure. "Mystery source failure" is what the diagnostic no codes produced. New motor? Priceless yeahh right!

Thank you ! Very clear instructions where the app had unclear ones ❤

Thank you! I couldn't for the life of me figure out the image in the app was of the docking station upside down or what exactly it wanted me to do.

I have an “Error: 145 Dirty water pump error” - any clues how to deal with it?

Thanks! So grateful for UA-cam instructional since you get so little from the manufacturer.

Thank you very much mate. Your video has helped many people. Good on ya mate

Well done for such an upload. I also couldn't find the part and googled it to find your video. They should state that its the bottom of the station unit in the error message. There is a higher probability of this area jamming if you over fill your dust bag, which is what I did. i opened mine up for nothing, as it was empty in the channel but full/blocked up the top where it joins/meets the bag. I took out as much as I could, using tweezers for the unreachable areas. I think I have removed 95% of the blockage. The rest will be blown into the dust bag or another error message will appear, which I will be able to remove from the dust bag joining point.

👍 nice

This was driving me absolutely nuts. Thanks for sharing.

Thank you sooo much. I was freaking out for good 3 hours, that I have to buy a new one 🤣 your video made my day!!!!

I miss these

Disconnect the battery from the car for a few seconds and it'll reset the system...just quick way to reset the codes

Thank you!!!! God Bless you!

Thank you!!!

THANK YOU THANK YOU THANK YOU. You have saved my sanity. I appreciate you so much for making this video.

Super helpful! Thank you! I actually had something trapped in the area right where the vacuum bag slots in as well.

this was it bro!

My docking station started auto-emptying itself one time at night, and since then it never stopped. I thought I had found the issue when I found this video, so I checked underneath and there's nothing stuck there :/ Replacing the dust bin bag doesn't work. Any hint maybe?

Love you!

Thank you so much! I didn't had a clue what the auto-empty dock bin is.

I'm craving one of these right now .. used to get them before school everyday. The chicken one wasn't bad either

Thanks, I had 0 idea and was scratching my head for days thinking about this. Roborock is sometimes really funny with their instructions

will it ever return?

Thanks so much, their service images leave a little something to be desired.....

Thank you!

I did the same exact process and had the same exact issue. My question is how do you deal with lower gas mileage after the fix? Mine has been horrible even after a tune up cleared issues

Thanks mate!

I have a similar issue where the brown wire is cut inside the front door panel midway below the control board. I was getting 00.5 volts at the inlet valve connector so I knew something was wrong. Float switch is fine and door latch switch works aswell. I did solder the wire back together and wrapped it with electrical tape just like you did but I still get 00.5 Volts at the connector level. I thought my job was bad I did it again but still nothing. This is driving me crazy how exactly did you test the P6-xyz etc on the controller board with the multimeter? Any tips?

Thanks so much I used to clean the bag only and reset 😂

ty you safed my robo <3

🙏 (this also works for S8)

Thanks man, highly appreciated

Also helped me - thanks!

Thanks so much for this. Exactly what l was looking for.

It over heated and possibly cracked the pump housing.

😮

My only source of happiness is coming back to watch this video so I can live in a world where the turkey cheddar bacon flatbread still exists

still miss this to this day. it was my go to and idk why I can't replicate it!